Какво търсите?

Въвеждане на търсено понятие

Съжаляваме!

Няма открити резултати от търсенето.

Регистрация

Забравили сте Вашата парола?

Вие сте нов клиент?

Регистрирайте се и си осигурете много предимства:

Проверка на наличността на продукта
Бърза следваща поръчка & История на поръчките
Лични препоръки за продукт
Плащане с фактура
Регистрирайте се сега

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+49-421-48907-766
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
Често задавани въпроси

HK FI AD 3600 MV N AF

Adsorberfilter bis 3600l-Tank MW m. V.
HKFIAD3600MVNAF

The product image may differ

HKFIAD3600MVNAF
Max. water absorption capacity
1,32 l
Количество въздух
180 m³/h
за размер на резервоара
1800 - 3600 литра 
Сваляне на PDF

Моля изберете изпълнение

Показване на таблица с артикули

Артикул

HK FI AD 0050 MV N AF HK FI AD 0100 MV N AF HK FI AD 0400 MV N AF HK FI AD 0800 MV N AF HK FI AD 1800 MV N AF HK FI AD 3600 MV N AF HK FI AD 5400 MV N AF
Подробности за продукта за

HK FI AD 3600 MV N AF

Max. water absorption capacity
1,32 l
Количество въздух
180 m³/h
за размер на резервоара
1800 - 3600 литра
Fill quantity Xdry
3,15 kg
Резервен балон
HK FI AD ETS 3600
A
432 mm
B
150 mm
C
181 mm
G
G 1″ -11
Всички качества

Свойства

Изпълнение
  • Reusable with activated carbon filter and valve base 
  • интегриран филтриращ елемент 3 μm 
Монтажно положение
  • отвесен 
Температура min.
  • -40 °C
Температура макс.
  • 80 °C
Материал
  • Housing: PA6, PC, AL 
  • seal: FKM (FPM) 
Съединение
  • външна резба BSP цилиндрична 
Connection position
  • at bottom 
Customs tariff number
  • 84213925 
Всички качества

Описание на продукта

Указания
After saturation, the adsorber filter can be opened and refilled.
The spare parts HK FI AD ETS and the desiccant HK FI AD SK can be found under accessories.
Other variants with housing made of aluminum and stainless steel and for aggressive media are available on request.
Design bases are medium, air flow rate or clunk pick-up volume.
Описание
The adsorber filters in the HK FI AD MV NAF series are aeration dryers with a reusable cartridge and a valve base.
They are suitable for indoor, outdoor and offshore use on hydraulic units, gearboxes, storage tanks and mobile machines.
The plastic housing is filled with HANSA-FLEX Xdry. The desiccant mixture ensures effective drying of the supply air.
A 3 µm filter additionally cleans the air drawn in.
A layer of activated carbon adsorbs the oil mist that escapes with the air.
If the adsorber filter is saturated, both the desiccant and, if necessary, all other internal components can be replaced inexpensively.
The sturdy frost-proof valve section protects the adsorber from unnecessary loading, enables use under extreme, dusty environmental conditions and ensures minimal pressure build-up even at high air flows.
допълнителна информация
In the adsorber filter, the water molecules contained in the air are bound in the pores of the adsorbent (HANSA-FLEX Xdry). Saturation (loading) and the need to replace the filter cartridge is indicated by a colour change from orange to green.
HANSA-FLEX Xdry consists of silicon oxide and zeolite and is classified as a synthetic, polar and hydrophilic drying agent. Due to its high porosity, it has a large inner surface area. This enables a very high water absorption capacity.
HANSA-FLEX Xdry with a colour indicator is used in the adsorber filters. Colour changes indicate the water content and thus the progress of the loading of the desiccant.
The mixture of silicon oxide and zeolite is not classified as a hazardous substance according to European Union legislation (Regulation EC number 1272/2008). It is not subject to labelling according to the EC Directive (67/548/EEC or 1999/45/EC). It is not classified as a substance hazardous to health or the environment.
Указание за поръчка
For mounting on the tank, the KH FI AD FS FILL filling flange is required.

Product variants

7 Results
Search
Показване на чертеж с размери
Обозначение
Max. water absorption capacity (l)
Количество въздух (m³/h)
за размер на резервоара
Fill quantity Xdry (kg)
Подробности / items
HK FI AD 0050 MV N AF
0,12 l
5 m³/h
0 to 50 litres 
0,3 
Узнайте повече
HK FI AD 0100 MV N AF
0,2 l
10 m³/h
50 to 100 litres 
0,5 
Узнайте повече
HK FI AD 0400 MV N AF
0,32 l
20 m³/h
100 to 400 litres 
0,75 
Узнайте повече
HK FI AD 0800 MV N AF
0,56 l
40 m³/h
400 to 800 litres 
1,3 
Узнайте повече
HK FI AD 1800 MV N AF
0,88 l
100 m³/h
800 to 1800 litres 
2 
Узнайте повече
HK FI AD 3600 MV N AF
1,32 l
180 m³/h
1800 - 3600 литра 
3,15 
Узнайте повече
HK FI AD 5400 MV N AF
1,84 l
260 m³/h
3600 to 5400 litres 
4,3 
Узнайте повече
количество въздух: препоръчителен въздухообмен за оптимална ефективност при изсъхване

Column selection

Max. water absorption capacity (l)
Количество въздух (m³/h)
за размер на резервоара
Fill quantity Xdry (kg)
Резервен балон
A (mm)
B (mm)
C (mm)
G
количество въздух: препоръчителен въздухообмен за оптимална ефективност при изсъхване

Части и принадлежности

Резервни части

Принадлежности