Какво търсите?

Въвеждане на търсено понятие

Съжаляваме!

Няма открити резултати от търсенето.

Регистрация

Забравили сте Вашата парола?

Вие сте нов клиент?

Регистрирайте се и си осигурете много предимства:

Проверка на наличността на продукта
Бърза следваща поръчка & История на поръчките
Лични препоръки за продукт
Плащане с фактура
Регистрирайте се сега

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+49-421-48907-766
Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
Често задавани въпроси

HK 9RS 04 BG1

Gear flow divider, group 1 9RS 4-way
MAS_HK_9RS_04_BG1

The product image may differ

MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1
MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1 MAS_HK_9RS_04_BG1
Design
with central phase compensation valve 
external leak oil discharge 
adjustment range DBV: 70 - 210 bar 
Pressure difference
max. 30 bar (between the sections) 
Construction type
4 sections 
Сваляне на PDF

Моля изберете изпълнение

Показване на таблица с артикули

Артикул

HK 9RS 04 D 18 HK 9RS 04 D 20 HK 9RS 04 D 21 HK 9RS 04 D 23 HK 9RS 04 D 25

Свойства

Design
  • with central phase compensation valve 
  • external leak oil discharge 
  • adjustment range DBV: 70 - 210 bar 
Pressure difference
  • max. 30 bar (between the sections) 
Construction type
  • 4 sections 
Size
  • group 1 

Описание на продукта

Указания
Before commissioning the system, the first running-in of the gear flow divider should be under no load.
Diagrams and circuit diagrams essentially valid as schematic diagrams also for 4-way flow dividers.
Описание
This flow divider is used to supply four independent hydraulic circuits with just one pump.
Division error approx. 3 %.
Equal pressure setting for all sections.
Valves adjustable from 70 - 210 bar, other setting ranges on request.
Modification to internal leak oil discharge possible - for this, close off port T with G1/2″ blind plug (modification recommended only after consultation!).
Configuration of gear flow dividers: qi = Q/z * 1000/n.
Qi = displacement/section [cm³].
Q = total input volume flow [l/min].
Z = number of sections.
N = rotating speed [rpm].
допълнителна информация
Recommended speed: 1800 - 2000 rpm

Product variants

5 Results
Search
Показване на чертеж с размери
Обозначение
p1 max. (bar)
p2 max. (bar)
Flow per element min. (l/min)
Flow per element rec'd (l/min)
HK 9RS 04 D 18
220 bar
270 bar
2 l/min
4 l/min
Узнайте повече
HK 9RS 04 D 20
220 bar
270 bar
2.5 l/min
5 l/min
Узнайте повече
HK 9RS 04 D 21
220 bar
270 bar
3 l/min
6 l/min
Узнайте повече
HK 9RS 04 D 23
220 bar
270 bar
3.5 l/min
7 l/min
Узнайте повече
HK 9RS 04 D 25
200 bar
240 bar
4.5 l/min
8 l/min
Узнайте повече
p1 = max. working pressure
p2 = max. peak pressure

Column selection

p1 max. (bar)
p2 max. (bar)
Flow per element min. (l/min)
Flow per element rec'd (l/min)
Flow per element max. (l/min)
Input volume per section (cm³)
A (mm)
Li (mm)
p1 = max. working pressure
p2 = max. peak pressure