PR 14-2 V2

Hydraulic tube 14x2 1.4541

The product image may differ

Ø d1

14 mm

2 mm

Случай на натоварване I

374 bar

Download PDF

Please choose a variant

Show table of articles

PR 04-1 V2 PR 06-1 V2 PR 06-1.5 V2 PR 08-1 V2 PR 08-1.5 V2 PR 10-1 V2 PR 10-1.5 V2 PR 10-2 V2 PR 12-1 V2 PR 12-1.5 V2 PR 12-2 V2 PR 14-1 V2 PR 14-2 V2 PR 14-2.5 V2 PR 15-1 V2 PR 15-1.5 V2 PR 15-2 V2 PR 15-2.5 V2 PR 16-1 V2 PR 16-1.5 V2 PR 16-2 V2 PR 18-1 V2 PR 18-1.5 V2 PR 18-2 V2 PR 18-2.5 V2 PR 18-3 V2 PR 20-1 V2 PR 20-1.5 V2 PR 20-2 V2 PR 20-2.5 V2 PR 20-3 V2 PR 20-4 V2 PR 22-1 V2 PR 22-1.5 V2 PR 22-2 V2 PR 22-2.5 V2 PR 22-3 V2 PR 25-2 V2 PR 25-2.5 V2 PR 25-3 V2 PR 25-4 V2 PR 28-1 V2 PR 28-2 V2 PR 28-2.5 V2 PR 28-3 V2 PR 28-4 V2 PR 30-1.5 V2 PR 30-2 V2 PR 30-2.5 V2 PR 30-3 V2 PR 30-4 V2 PR 32-1.5 V2 PR 32-2 V2 PR 34-2 V2 PR 35-1.5 V2 PR 38-2 V2 PR 38-3 V2 PR 38-4 V2 PR 38-5 V2 PR 40-1.5 V2 PR 42-2 V2 PR 42-3 V2 PR 54-2 V 2

Product details for

PR 14-2 V2

Ø d1

14 mm

2 mm

Случай на натоварване I

374 bar

Случай на натоварване IІІ

269 bar

Ø d2

10 mm

Толеранс AD +/-

0,08 mm

Толеранс ІD +/-

0,15 mm

All characteristics

Characteristics

Допълнение към конструкцията

CFA = bright annealed (annealed, metallically bright)

Изпълнение

метричен

Конструкция

precision steel tube, seamless, (cold-drawn), metric

Материал

stainless steel X6CrNiTi18-10 (1.4541 / AISI 321)

Стандарт

DIN EN 10216-5

Дължина на тръбата

5 to 7 metres*.

Customs tariff number

73044100

All characteristics

Product description

Notes

Посочените данни за налягане се отнасят за прави тръби.
При извити тръби трябва аналогично на DIN EN 13480-4 да се изчислят съответните дебелини на стените.
*Stainless steel tubes are supplied in manufactured lengths according to EN 10216-5. In terms of production, these are usually 6 meters (+/- 1m). Order quantities are rounded to the nearest possible total length, without cutting.

Description

The stainless steel pipes made of materials 1.4301 / AISI 304 (V1), 1.4541 / AISI 321 (V2) and 1.4571 / AISI 316Ti (V4) are supplied in CFA condition (bright annealed) as standard. This condition offers very good bendability and is the established standard in the hydraulics sector, particularly for the installation of pipelines.
Our stainless‑steel tubes are tested according to DIN EN 10216‑5. The dimensional tolerances (Ø, wall thickness, ovality) are restricted in accordance with DIN EN 10305‑1 ranging from 4 to 42 mm in outer diameter (Ød1). Larger dimensions are classified according to EN ISO 1127 D3/T.

Further information

Изчисление аналогично на DIN 2413
Specific load I: static (up to 120 °C)
Load case III: dynamic (up to 120 °C) stress range = P bar
Strength parameter: K 222 [N/mm²]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 225 [N/mm²]
Tolerances (Ø, wall thickness, ovality) in accordance with DIN EN 10305-1
Elastic strength to DIN DIN 10216-5 Rp 1.0 to 50°C
Стойността за границата на якост при постоянно пулсиращо натоварване е намалена в отношение към коефициента на якост от 1.4571.

Ordering information

Other delivery conditions, such as CFD, are available on request and must be specified separately.